*** Please read this notice about shipping charges and VAT if your delivery address is outside the U.K. ***

Micron MR001c Configuration Table for Firmware Version 1.0

The pre-loaded configurations are shown below. Unless otherwise specified when the receiver was ordered, config 1 is enabled by default. The other loaded configurations can be selected using a power-on configuration change or by programming.

Configurations

This configuration table is for version 1.0. For other versions, refer to mr001c_version.

Port	1: Centre-off throttle, no Selecta	2: Centre-off throttle, Selecta enabled	3: low2centre throttle/direction, Selecta enabled	4: Centre-off throttle, Selecta enabled, sound triggers on P3/P4/P5
H1	Centre-Off ch1	Centre-Off ch1	Low2Ctr ch1, dir ch3	Centre-Off ch1
P1	Throttle servo or ESC on H1	Throttle servo or ESC on H1	Throttle servo or ESC on H1	Throttle servo or ESC on H1
P2	Servo on ch2	Servo on ch2	Servo on ch2	Momentary on ch3, low 0V
P3	Servo on ch3	Servo on ch3	Disabled	Momentary on ch3, high 0V
P4	Servo on ch4	Servo on ch4	Servo on ch4	Momentary on ch5, low 0V
P5	Servo on ch5	Servo on ch5	Servo on ch5	Servo on ch5
P6	Front Light on H1 (LED2)	Front Light on H1 (LED2)	Front Light on H1 (LED2)	Front Light on H1 (LED2)
P7	Rear Light on H1	Rear Light on H1	Rear Light on H1	Rear Light on H1
P8	Momentary on ch3, low 3.3V	Momentary on ch3, low 3.3V	Momentary on ch3, low 3.3V	Momentary on ch3, low 3.3V
P9	Momentary on ch3, low 3.3V	Momentary on ch3, low 3.3V	Momentary on ch3, low 3.3V	Momentary on ch3, low 3.3V
P10	Disabled	Disabled	Disabled	Disabled
LED2	P6	P6	P6	P6
Selecta	Disabled	Enabled	Enabled	Enabled
Sleep time	1 hour	1 hour	1 hour	1 hour
Cruise	Enabled	Enabled	Enabled	Enabled