*** Please read this notice about shipping charges and VAT if your delivery address is outside the U.K. ***

Micron MR603 Configuration Table for Firmware Version 1.4

This document is an addendum to the base MR603 User Manual.

Configurations

This configuration table is for version 1.4. For other versions, refer to mr603_version.

The pre-loaded configurations are shown below. Unless otherwise specified when the receiver was ordered, config 1 is enabled by default. The other loaded configurations can be selected using a power-on configuration change or by programming.

Port 1: Centre-off throttle 2: MyLocoSound triggers on A-D (Tx22) 3: MyLocoSound triggers on A-D (Tx20) 4: Road Vehicle 5: Tx with 3-way toggle on ch2 & ch4
H1 Centre-Off ch1 Centre-Off ch1 Centre-Off ch1 Centre-Off ch3 Low-Off ch1, dir ch3
P1 Front Light on H1 (LED2) Front Light on H1 (LED2) Front Light on H1 (LED2) Servo on ch2
Steering
Momentary on ch2, high 0V
P2 Rear Light on H1 Rear Light on H1 Rear Light on H1 Left indicator activate=ch4, steer=ch2 (LED2) Momentary on ch2, low 0V
P3 Momentary on ch3, low 3.3V Momentary on ch3, low 3.3V Momentary on ch3, low 3.3V Right indicator Momentary on ch4, high 0V
P4 Momentary on ch3, high 3.3V Momentary on ch3, high 3.3V Momentary on ch3, high 3.3V Brake Light on H1 Momentary on ch4, low 0V
P5 Momentary on ch5, low 3.3V Momentary on ch5, low 3.3V Momentary on ch5, low 3.3V Reverse Light on H1 Momentary on ch5, low 3.3V
P6 Momentary on ch5, low 0V Momentary on ch5, low 0V Momentary on ch5, low 0V Momentary on ch1, high 3.3V
Driving lights
Momentary on ch5, low 0V
F1/A/P7 Front Light on H1 Momentary on ch3, high closed Momentary on ch2, low closed Momentary on ch3, high closed Front Light on H1 (LED2)
F2/B/P8 Rear Light on H1 Momentary on ch3, low closed Momentary on ch4, low closed Momentary on ch3, low closed Rear Light on H1
F3/C/P9 Momentary on ch5, low closed Momentary on ch5, low closed Momentary on ch5, low closed Momentary on ch5, low closed Momentary on ch5, low closed
F4/D/P10 Latch on ch5, start open, toggle low Latch on ch5, start open, toggle low Latch on ch5, start open, toggle low Latch on ch5, start open, toggle low Latch on ch5, start open, toggle low
LED2 P1P1P1P2F1
Selecta Enabled Enabled Disabled Disabled Disabled
LVC Enabled Enabled Enabled Enabled Enabled
Sleep time 1 hour 1 hour 1 hour 1 hour 1 hour
Cruise Enabled Enabled Enabled Enabled Enabled

P outputs switch between 0V (off) and 3.3V (on). F outputs are switched to negative and are open (off) or closed (on).


© Micron Radio Control