Deltang DSM2/DSMX Micro Receivers

Deltang has discontinued all receiver products as the radio chip is no longer available. Listings will remain on this page while at least one of each type remains in stock. Please contact us to enquire about stock level if you want to order more than 1 of any type.

Micron is working on replacements but there is currently no ETA.

These receivers are designed for aero models. If you are looking for receivers with fwd/rev ESC for vehicles, boats, trains then take a look at the Model Rail & Land-Based Vehicle R/C.

Servo Receivers


Rx34b DSM2 Micro Receiver with Single 2A ESC (1.25mm Molex)

The previous version of Rx34 with a single 2A ESC. The receiver supports only DSM2.

Price from £24.00


Rx35d DSM2/DSMX Micro Receiver with 2 x 2A ESC (1.5mm JST-ZH)

Rx35d is a DSM2/DSMX compatible 6 channel micro receiver with JST-ZH connectors and 2 x 2A brushed ESC. Channels 1-4 (Throttle, Aileron, Elevator, Rudder) have connectors, channels 5 and 6 (Gear, Aux) are available as pads on the circuit board. Motor connections to both ESC are via circuit board pads and rudder or aileron can be mixed in for differential steering. External ESC, with optional ail/rud mix, may be connected to both throttle channels.

Rx35d
Size:17.0 x 12.1 x 8 mm
Weight:0.71 gm

Compatible JST-ZH connectors are available.

The Rx35d is on the left of the image. The receiver on the right is a bare board without connectors, weighing 0.35gm. View the Rx35d user instructions.

Price from £28.80


Rx27-H and DSM2/DSMX Micro 6 Channel Receiver

Rx27 is a DSM2/DSMX compatible 6 channel micro receiver with standard 0.1" (2.54mm) pitch connectors and greater range than the Rx36. Channels 1-5 have connectors and channel 6 is available at the opposite end of the circuit board; a connector may be fitted.

Rx27
Size:29.0 x 14.5 x 11 mm
Weight:2.1 gm

DSM2/DSMX version: the DSM2/DSMX receiver has version 3.x firmware and does not provide fail-safe.